 WINDOW TINTING
CAR ALARMS & SECURITY
REMOTE STARTS & KEYLESS ENTRY
CLEARBRA PAINT PROTECTION
CARBON FIBER & MATTE VINYL WRAPS
NAVIGATION SYSTEMS
MOBILE AUDIO / VIDEO ENTERTAINMENT
BACKUP CAMERAS
VINYL LETTERING AND GRAPHICS
BLUETOOTH SERVICES
WINDSHIELD CHIP REPAIR
|
| |
 Prep
- We suggest that you check out the patterns selection below for your car.
- For the best paint protection application, we recommend that you have your vehicle washed on the outside.
- We ask that you please remove all your personal valuables from the inside of your vehicle.
Post
- Before washing or other treatments, allow a minimum of 72 hours to cure completely and for moisture to evaporate.
- Do not use a pressure washer or vehicle drive-thru car wash for 30-day cure time. You can hand wash only.
- Use only car wash soap. Do not use powder based or abrasive cleaners, solvent based degreasers, detergents, rubbing compound, clay, or other type of abrasives. No high speed buffing or polishing equipment. No bug/tar removers.
- When waxing your new paint protection film, we recommended you use Plexus plastic cleaner protectant & polish only. We’ll give you a free can with your installation.
- After your 30-day cure time, to achieve the highest level of protection and appearance, follow our instructions.
- Regular waxing is required to maintain the film’s luster.
- For wax build-up around edges, gently use a cotton swap dipped in isopropyl 70% - 90% (rubbing) alcohol.
- When washing your car using high pressure washers, keep nozzle at least 36” away from paint protection edges.
- Do not use dyed or colored car waxes on the film; use only soft terry cloth of micro fiber towels on the film.
- If you have any questions, please don’t hesitate to call or email us.
|
|
| |
|
|
